KE7100 LANcheck LAN Tester

General

  • Checks for wiring errors in Network cabling
  • Cable length measurement (TDR)
  • Blink-identifies switch ports using Link activity lights
  • Power over Ethernet Test to IEEE802.3af standard
  • High power trace tone signal to use with Probe KE310
  • Master identifies up to 32 individual Remotes
  • Master and Remotes over voltage protected to 100 Volt
  • Identifies the majority of the network wiring faults and wire-map errors

Put into the shopping basket

Please Log-In to use the shop. You don`t have a Log-In? Here you can register.

Questions?    +49(0)7121-97550

info(AT)kurthelectronic.de

Features
Technical Specifications
Optional Accessories
Accessories
Recommend product

The KE7100 LANcheck is the light version of the top of the line model KE7200 Ethernet Performance Tester and is an easy-to-use tool for verification and troubleshooting in small and big networks. 
Wire mapping including fault location and detection of split pairs, TDR length measurement and Power over Ethernet Test.
 
KE7100 tests for wire continuity, opens, shorts, miswires and split pairs and shows test results on the easy to read graphical display with backlight. The length of the cable and distance to fault (short or open) is also shown by the KE7100.

The KE7100 can perform a Power over Ethernet Test (IEEE802.3af). KE7100 not only checks for ability of Power over Ethernet, it detects the type available and what power level is supported. PoE is appearing more commonly as devices like wireless access points (WAP), IP cameras and IP telephones grow in popularity. Mismatches between equipment and power supply can cause a variety of problems.

The KE7100 is a easy to use handheld tester with powerful features and an outstanding cost/performance ratio.
 
 
Download Datasheet

Cable Trace:
 4 tones settable:
 1. SOLID: 1000 Hz
 2: ALT: 1000/880 Hz
 3. SOLID: 2600 Hz
 4: ALT: 2600/1900 Hz

Over Voltage Protection:
 Master and Remotes up to 100 V 

Housing KE7100 and Remote KE7010:
 Solid and weather protected ABS with Drop Protection

Batterie:
 4 x 1,5V Alkaline Batty
 Operating time up to 100 Stunden
 Remote without Battery
 
 Dimensions:
 KE7100:
 195 x 100/78 x 45 mm
 KE7010:
 61 x 41 x 26 mm

Weight:
 KE7100: 
 380 g without Battery
 KE7010:
 30 g

Environment:
 Working temperature: -5 - +50 g Celsius
 Storage temperature: -25 - +75 g Celsius
 Humidity: 90% non condensing

Optional Accessories/Optional KIT:
 
KE7010 Remote:
Single Remote KE7010, programmable ID (up to 32 Remotes can be used simultaneously)

KE7010 KIT:
4 Remotes KE7010, programmable ID and Pouch
 
KE7010 PRO KIT:
4 Remotes KE7010, programmable ID, Capacitive Probe310 and Pouch 

  • KE7100 LANcheck
  • 1 active Remote KE7010
  • Pouch
  • Set of Test Cords
  • User Manual