KE301 Classic Kit

Please note: In this B2B shop we sell only to customers within Germany. If you want to order from another country, please send us an e-mail to sales@kurthelectronic.de.

Multifunctional line tracers!

The cable finder kits consist of EasyTest and Probe and enable any technician to find any type of cable, wires and wire pairs in the shortest possible time without contact and without time-consuming stripping work. During this process, faults such as interchanges, overdrafts, interruptions and other faults in the cable are detected. The cable tracers can be used for all types of cables such as telephone cables, bell cables, data cables of all classes, coaxial cables and voltage-free electrical cables.

Feeding the search signal onto active telecommunication lines with up to 100 V voltage as well as numerous other functions make these devices a popular tool for installation companies.

KE301 Classic Kit:

  • For searching in telephone cabling and for wire pair
    identification
  • RJ11 plugs & crocodile clips
  • 120 V AC overvoltage protection
SKU: 0.49562 Category:
ET300 Classic Kit Tone Generator
Durable wire lead length 25 cm
Lead connectors 2x fixed alligator clips
1x long RJ11 plug
Functions Continuity test through LED
Resistance test through frequency change
Low Batt indication by flashing LED
Auto shut off after 45 minutes
Auto shut off override
Unit ON indication by LED
Indication of ALTernating freq. by flashing LED
Indication of SOLID freq. by steady LED
Data Port test with HUB-Blink
Visual Fault Location (VFL)
Search frequencies 6 frequencies selectable
SOLID: 1000, 2600, 577.5 Hz and ALT: 1000/800, 2600/1900, 577.5 intermittent
Accuracy <±1% (quartz)
Reach Trace cable length up to 15 km (no load)
Tone over shorted pair up to 250 m
Transmitting Power High power output with 9.2 V battery :
9.0 V PP no load
10 dBm into 600 Ohm
9 dBm into 100 Ohm
7,5 dBm into 50 Ohm
Overvoltage Protection 120 V AC/DC
Dimensions / Weight 68 x 96 x 25 mm / 150 g without battery
Additional features Test leads protected by rubber-strain relief
Gold plated contacts
Separate battery compartment
KE301 – KE801 General Specifications
Power supply 9 V battery
>100 hrs operating time
Housing Heavy duty water resistant housing made from ABS, elastomeric silicon rubber push button switches
P310 & P510 Probe
Functions 1 kHz filtered signal detection LED
Torch light function
Reach Trace distance to cable/wire up to 100 cm
Dimensions / Weight 220 x 40/34 x 25 mm / 80 g without battery
Additional Features Exchangeable non-conductive solid carbon fiber tip
3.5 mm earphone jack
Gold plated contacts
Separate battery compartment
KE301 Classic Kit
KE301 Classic Kit Data Sheet (DE/EN) 1.00 MB
KE301-KE801 Manual (DE/EN) 1.32 MB

Product Catalogue

Kurth Electronic catalogue 13.58 MB