This item is no longer available.
Alternatively, you can use the following device:
0.49840 KE3700 xDSL MultiTest
Full access to VDSL2-Vectoring and Triple Play Tests!
The KE3500 xDSL MultiTest offers tests in ADSL1/2/2 + and VDSL2 environments with full exams on VDSL-Vectoring. It performs other functions such as ISDN and POTS test telephone, triple play testing for IPTV and VoIP suitability as well as the ability to do extensive copper testing up to 31 MHz makes it the universal working tool for installers and service technicians.
With its innovative operation concept several tests are performed simultaneously and are still configurable without the loss of synchronization.
Autodetection of the DSL service and automated measurements on the copper pair allows fast and efficient work.
The user-friendly starting price in broadband measurement technology helps within the acquisition of the required instrumentation.
KE3500 xDSL Multitester | |
---|---|
Compliance ADSL1/2/2+ | ITU-T G.992.5 (ADSL2+ incl. Annex A, B, J, M), ITU-T G.992.3 (ADSL2 incl. Annex A, B, J, L), ITU-T G.992.1 (G.DMT incl. Annex A, B, J) ATIS/ANSI T1.413 Issue 2 IEEE 802.3ah (PTM) |
Compliance VDSL2 | ITU-T G.993.2 Annex A, B (Vectoring) Profiles: 8a/b/c/d, 12a/b, 17a Band Plan: 997, 998, US0 IEEE 802.3ah (PTM) |
DSL parameters | Maximum attainable bit rates Actual achieved bit rates Actual bonded achieved rates Latency modes: fast, interleaved Data modes: ATM, PTM Capacity (%) Signal-to-noise ratio (SNR) margin Output power Attenuation Bits/bin Attenuation/bin (Hlog/bin), QLN/bin, SNR/bin Vendor code, revision Interleave depth Interleave delay INP G.INP Vectoring Modes: PTM, ATM LOS, FEC, CRC, HEC, LOF, LOM, SES, ES LATN per band, SATN per band |
Test interfaces | G.FAST, VDSL2, ADSL 1/2/2+ with autodetection Ethernet 10/100 Ethernet 10/100/1000 Webbrowser applicable for test interfaces |
Encapsulation | RFC 2684 supporting bridged Ethernet (IPoE), IPoA (RFC 1577), PPPoE (RFC 2516), PPPoA/LLC and PPPoA/VC-MUX (RFC 2364) |
Operating modes | DSL Terminal, Router and Modem Mode Modem replacement (DSL to Ethernet) Ethernet Terminal-Mode |
Login format | Username and password using PAP/CHAP |
Connectivity support | TR69 / BNG LAN/WAN status DNS, gateway DHCP client / server, DHCP vendor class NAT VLAN ID, VLAN tagging VPI/VCI IPv4 and IPv6 Signal Strength |
Ping test* | Ping destination: Gateway, IP-Address or URL Number of Pings: 1 to 99 Packet size: 32 to 1200 Bytes (default is 32) Timeout: 1 to 10 seconds Results: Packets sent/received, average round-trip delay (ms) (* Run any number of tests simultaneously) |
Trace route test* | Traceroute destination: Gateway, IP-Address or URL Timeout: in seconds, default is 1 s, maximum is 10 s Packetsize: 32 Bytes Number of hops: 1to 32 (default is 30) Results: Indicates IP address of hop and round trip time in milliseconds (ms) (* Run any number of tests simultaneously) |
FTP/HTTP speed tests* | Address: IP or URL Direction: Upload and/or Download up to 700 MBit/s Results: Timet, kB transferred, speed in kBit/s Bookmarks: User-definable (* Run any number of tests simultaneously) |
Software options | IPTV Test (Set Top Box emulation) Jitter, MOS,... VoIP Test (terminal simulation) Jitter, MOS,... |
Interface options | KECT copper qualifying up to 31 MHz and Telco Multimeter TDR fault detection / localization ISDN BRI Uk0 / S0 / POTS interface |
Display | 3,5" TFT Display, RGB 240 x 320 |
Power supply | LiPo battery with approximately 4 hours operation at full load mode |
Dimensions | 230 x 110/90 x 70 mm |
Weight | 800 g |
Housing | Impact-resistant ABS case with protective and high impact plexiglass as display cover |
Menu languages | German, English, French, Italian, Dutch, Spanish |