This item is no longer available.
Alternatively, you can use the following device:
0.49840 KE3700 xDSL MultiTest
The “All-in-one” Solution for all Broadband Technologies!
The KE3600 xDSL MultiTest is a versatile and revolutionary xDSL tester of DSL services in ADSL1/2/2 + / VDSL2 (vectoring) and bundled networks and as well in FTTx deployments (GPON, Dark Fiber).
With a variety of interfaces the outstanding KE3600 xDSL Multitester supports many access network technologies. Accelerated fault diagnosis is made possible by its simple operation even for untrained technicians. Interferences in the network, in the outdoor and inhouse cabling but also in CPE can be narrowed down quickly. Even in FTTH networks KE3600 carries out measurements at its Ethernet or built-in SFP port.
With the autodetect function of the DSL service no choice between ADSL and VDSL is necessary. Automated and editable measurements on the copper pair allows fast and efficient work. The universal SFP slot for measurements in FTTx deployments makes the KE3600 the ideal solution for these broadband technologies.
The excellent price-performance and the guaranteed future security by the used module technology makes the KE3600 Multitester the perfect tool for all inspection tasks of current and future broadband technologies and sets standards in its class!
KE3600 xDSL Multitester | |
---|---|
Compliance ADSL1/2/2+ | ITU-T G.992.5 (ADSL2+ incl. Annex A, B, J, M), ITU-T G.992.3 (ADSL2 incl. Annex A, B, J, L), ITU-T G.992.1 (G.DMT incl. Annex A, B, J) ATIS/ANSI T1.413 Issue 2 IEEE 802.3ah (PTM) ITU-T G.998.1/2/3 (Bonding) |
Compliance VDSL2 | ITU-T G.998.1/2/3 (Bonding with Profile 30a) ITU-T G.993.2 Annex A, B (Vectoring) Profiles: 8a/b/c/d, 12a/b, 17a Band Plan: 997, 998, US0 IEEE 802.3ah (PTM) |
Compliance G.FAST | ITU-T G.9700/9701 |
DSL parameters | Maximum attainable bit rates Actual achieved bit rates Actual bonded achieved rates Latency modes: fast, interleaved Data modes: ATM, PTM Capacity (%) Signal-to-noise ratio (SNR) margin Output power Attenuation Bits/bin Attenuation/bin (Hlog/bin), QLN/bin, SNR/bin Vendor code, revision Interleave depth Interleave delay INP G.INP Vectoring Modes: PTM, ATM LOS, FEC, CRC, HEC, LOF, LOM, SES, ES LATN per band, SATN per band |
Test interfaces | G.FAST, VDSL2, ADSL 1/2/2+ with autodetection Ethernet 10/100 Ethernet 10/100/1000 Webbrowser applicable for test interfaces |
Encapsulation | RFC 2684 supporting bridged Ethernet (IPoE), IPoA (RFC 1577), PPPoE (RFC 2516), PPPoA/LLC and PPPoA/VC-MUX (RFC 2364) |
Operating modes | DSL Terminal, Router and Modem Mode Modem replacement (DSL to Ethernet) Ethernet Terminal-Mode |
Connectivity support | TR69 / BNG LAN/WAN status DNS, gateway DHCP client / server, DHCP vendor class NAT VLAN ID, VLAN tagging VPI/VCI IPv4 and IPv6 Signal Strength |
Ping test* | Ping destination: Gateway, IP-Address or URL Number of Pings: 1 to 99 Packet size: 32 to 1200 Bytes (default is 32) Timeout: 1 to 10 seconds Results: Packets sent/received, average round-trip delay (ms) (* Run any number of tests simultaneously) |
Trace Route test* | Traceroute destination: Gateway, IP-Address or URL Timeout: in seconds, default is 1 s, maximum is 10 s Packetsize: 32 Bytes Number of hops: 1to 32 (default is 30) Results: Indicates IP address of hop and round trip time in milliseconds (ms) (* Run any number of tests simultaneously) |
FTP/HTTP speed tests* | Address: IP or URL Direction: Upload and/or Download up to 700 MBit/s Results: Timet, kB transferred, speed in kBit/s Bookmarks: User-definable (* Run any number of tests simultaneously) |
Software options | IPTV Test (Set Top Box emulation) Jitter, MOS,... VoIP Test (terminal simulation) Jitter, MOS,... |
Interface options | xDSL Bonding-Module** SHDSL 8 wire interface KECT copper qualifying up to 31 MHz and Telco Multimeter TDR fault detection / localization SFP-Port for copper, fiber (second GbE-Port) or GPON (ONT), Transceiver optional* ISDN BRI Uk0 / S0 / POTS interface ISDN PRI S2M Interface** (** More information and availability on request) |
Display | 3,5" TFT Display, RGB 240 x 320 |
Power supply | LiPo battery with approximately 4 hours operation at full load mode |
Dimensions | 230 x 110/90 x 70 mm |
Weight | 820 g |
Housing | Impact-resistant ABS case with protective and high impact plexiglass as display cover |
Menu languages | German, English, French, Italian, Dutch, Spanish |