The product has been discontinued and is no longer available. It can be replaced by Gossen Metrawatt’s METRAFUSE FD PRO ».
Electrical line tracer with extensive accessories, CAT III 250 volts, for locating active fuses and circuit breakers in the sub-distribution.
The line tracer set KE601 Electric, consisting of the transmitter EasyTest600 and the signal receiver Probe610, was developed for intuitive and quick work in active electrical installations.
A ferrite transducer test tip makes the signal receiver ideal for working in active electrical installations. The automatic adjustment of the signal sensitivity at the push of a button allows the user to achieve the desired search results after only a short use of the signal receiver. In addition to the acoustic signal evaluation, the 6-stage visual display of the signal strength on the Probe610 also helps the user during localisation.
For testing, the EasyTest600 transmitter is connected via a connection cable to the circuit to be tested, which simultaneously supplies the device.
A mains cable and a test probe set with crocodile clips and safety plugs are available to the user as connection options. Localisation is possible up to a cable length of several hundred metres without affecting other devices.
In addition to the test leads, the scope of delivery also includes a high-quality device bag.
| EasyTest600 | |
|---|---|
| Power supply | Cirquit under test (100 – 250 V AC, 50 – 60 Hz), power consumption < 20 mA |
| Ambient conditions | Operating temperature: 0 – +40 °C Storage temperature: -20 – +60 °C Relative humidity: max. 75%, no condensation allowed Height: max. 2000 m |
| Electrical safety | Measuring category CAT III, 250 V Pollution degree 2 Protection Category II |
| Electromagnetic Compatibility (EMC) | Interference emission / immunity: EN61326-1: 2013 resp. EN61326-2-2: 2013 |
| Protection category | IP20 |
| Dimensions W x H x D | 160 x 85 x 35 cm |
| Weight | 166 g |
| KE601 Test Probe Set | |
|---|---|
| Fuse | Super-fast (FF) Safety Fuses 10 A, 600 V, 6,3 x 32 mm |
| Measuring category | CAT III 1000 V, CAT IV 600 V |
| Probe610 | |
|---|---|
| Power supply | 9 V alkaline battery type PP3/MN 1604/6F22 or equivalent, auto power off after 6 minutes |
| Ambient conditions | Operating temperature: 0 – +40 °C Storage temperature: -20 – +60 °C Relative humidity: max. 75%, no condensation allowed Height: max. 2000 m |
| Electrical safety | Measuring category CAT III, 250 V Pollution degree 2 Protection Category II |
| Electromagnetic Compatibility (EMC) | Interference emission / immunity: EN61326-1: 2013 resp. EN61326-2-2: 2013 |
| Protection category | IP20 |
| Dimensions W x H x D | 210 x 50 x 35 cm |
| Weight | 78 g without battery |
| KE601 Data sheet |
 846.31 KB
|
| Kurth Electronic catalogue |
13.63 MB
|
