KE7000 Ethernet FlexiTest – Kurth Electronic

KE7000 Ethernet FlexiTest

Please note: In this B2B shop we sell only to customers within Germany. If you want to order from another country, please send us an e-mail to sales@kurthelectronic.de.

KE7000 Cable Tester

The KE7000 are cost-effective test devices for patch, LAN and telecommunication cabling and, with an optional adapter, also for coaxial cables.

  • Testing Phone (RJ11), data (RJ45) and optionally Coax lines
  • Tests for Continuity, open, short, reversals, shield and shows multiple faults
  • Device pair shows errors on both sides
  • Detection of active switches at remote line end
  • Clear display of cable status
  • Overvoltage protection up to 60 V
  • Cost-effective and robust
Login to see prices
SKU: 0.49470 Category:

The KE7000 are cost-effective test devices for patch, LAN and telecommunication cabling and, with an optional adapter, also for coaxial cables. The KE7000 test and verify unshielded and shielded connection cables with twisted pairs (UTP and STP cables) in installed networks or patch cables. BNC and F-socket coaxial cables can be tested for continuity using the optional RJ45 coax adapter. One device is automatically configured as master and one as slave. The advantage of using two main devices is that the status of the tests can be read on both sides. This leads to a real time saving. With a battery life of up to 100 hours, the measuring operation rarely needs to be interrupted.

Occurring errors such as mix-ups, interruptions, short circuits and screen errors are shown on the displays. It is not necessary to take notes of blinking and flashing LEDs. The KE7000 provide clear, fast and immediately evaluable status information on both ends on the LCD displays for cable lengths up to approx. 150 m.

If external voltage is applied to the cables to be tested, the KE7000 warn the user and indicate which polarity is connected to which pins. The devices are protected against overvoltage up to 60 V.

KE7000 Ethernet FlexiTest
Cable types UTP 4 pair, STP, FTP, 568A, 568B, USOC, Coax (adaptor available optionally)
Fault detection Short circuit, interruption, crossed pairs, transposition, shield faults, multiple faults
Cable length Max. 150 m
Battery lifetime Approx. 100 hours
Battery 9 V block battery
Dimensions 160 x 95 x 35 mm
Weight 160 g without battery
Casing Impact resistant ABS with fall protection
Operating temperature 0 to 50 °C
KE7000 Ethernet FlexiTest
KE7000 Data sheet DE/EN 935.51 KB

Product Catalogue

Kurth Electronic catalogue 16.90 MB