Multifunctional line tracers!
The cable finder kits consist of EasyTest and Probe and enable any technician to find any type of cable, wires and wire pairs in the shortest possible time without contact and without time-consuming stripping work. During this process, faults such as interchanges, overdrafts, interruptions and other faults in the cable are detected. The cable tracers can be used for all types of cables such as telephone cables, bell cables, data cables of all classes, coaxial cables and voltage-free electrical cables.
Feeding the search signal onto active telecommunication lines with up to 100 V voltage as well as numerous other functions make these devices a popular tool for installation companies.
KE701 Telco Kit:
Please accept YouTube cookies to play this video. By accepting you will be accessing content from YouTube, a service provided by an external third party.
If you accept this notice, your choice will be saved and the page will refresh.
ET700 Telco Kit Tone Generator | |
---|---|
Durable wire lead length | 25 cm |
Lead connectors | 2x banana with alligator clips 1x long RJ11 plug 1x RJ45 plug |
Functions | Continuity test through LED + Tone Resistance test through frequency change Low Batt indication by flashing LED Auto shut off after 45 minutes Auto shut off override Unit ON indication by LED Indication of ALTernating freq. by flashing LED Indication of SOLID freq. by steady LED Data Port test with HUB-Blink |
Search frequencies | 6 frequencies selectable SOLID: 1000, 2600, 577.5 Hz and ALT: 1000/800, 2600/1900, 577.5 intermittent Accuracy <±1% (quartz) |
Reach | Trace cable length up to 15 km (no load) Tone over shorted pair up to 250 m |
Transmitting Power | High power output with 9.2 V battery : 9.0 V PP no load 10 dBm into 600 Ohm 9 dBm into 100 Ohm 7,5 dBm into 50 Ohm |
Overvoltage Protection | 500 Volt DC / 350 V AC |
Dimensions / Weight | 68 x 96 x 25 mm / 150 g without battery |
Additional features | Test leads protected by rubber-strain relief Gold plated contacts Separate battery compartment |
KE301 – KE801 General Specifications | |
---|---|
Power supply | 9 V battery >100 hrs operating time |
Housing | Heavy duty water resistant housing made from ABS, elastomeric silicon rubber push button switches |
P410 Probe | |
---|---|
Functions | 1 kHz filtered signal detection LED Torch light function ISDN signal detection LED |
Reach | Trace distance to cable/wire up to 100 cm |
Dimensions / Weight | 220 x 40/34 x 25 mm / 80 g without battery |
Additional Features | Exchangeable non-conductive solid carbon fiber tip 3.5 mm earphone jack Gold plated contacts Separate battery compartment |