KE7100 LANcheck LAN Tester

Aufgrund der Integration von Kurth Electronic in die Gossen Metrawatt GmbH werden von uns vorerst keine Bestellungen mehr über die Webseite angenommen.
Bestellungen schicken Sie bitte per Email an
Due to the integration of Kurth Electronic into Gossen Metrawatt GmbH, we will no longer accept orders via the website for the time being.
Please send orders by email to

This item is no longer available.

Alternatively, you can use the following device:
0.49420 KE7200 Ethernet Performance Tester

Handy and cost-effective network tester!

The KE7100 LANcheck is an easy-to-use, handy and cost-effective LAN tester with a wide range of functions. The little brother of the KE7200 Ethernet Performance Tester is perfectly suited for measurements in ICT networks where no documentation carried out by the measuring device is required or necessary.

  • LAN tester with split pair detection
  • Configurable cable database from 1 pair upwards
  • TDR cable length measurement up to 200 m
  • Detection and localization of cable faults from 1 wire pair upwards incl. Profinet
  • Power over Ethernet load test up to 90 Watt, PoE/+/++/LTPoE (IEEE802.3af/at/bt)
  • Portfinder function
  • Integrated cable database
  • Detection of 10 / 100 / 1000 Mbit/s connections
  • Overvoltage protection up to 100 V
SKU: 0.49410 Category:

The KE7100 checks wires and wire pairs of the cable sections for continuity, interruption, short-circuit, interchange and overdraft (split pair) and simultaneously determines their length – in the case of interruption and short-circuit even the precise location of the fault.

The KE7100 also tests telecommunication lines up to a line length of 200 m and determines the distance to the end of the line or the location of a possible break.

The integrated and user-editable cable database contains up to 16 known network cables. The ability to create custom wiring profiles makes unknown wiring a thing of the past. The wiring database of the KE7100 contains numerous predefined wiring profiles, starting from just one wire pair.

To simplify and speed up measurements, the KE7100 supports up to 32 remote units, which are connected at the far end of the cable to test. Using several of these KE7010 remote units saves time and walking distances.

To help with the detection of active data ports, KE7100 displays link activity in 10 / 100 / 1000 Mbps networks.

The port finder function activates the link LED of a switch at the far end and allows the visual identification of the network connection at the switch.

KE7100 has a Power over Ethernet test to simplify the installation of IP telephones, IP cameras, etc. The test determines whether the network connection or the switch at the remote end can supply PoE. It also shows with how much power the terminal device is provided. The availability and load test supports PoE, PoE+ and even PoE++ as well as LTPoE, with a power consumption of up to 90 watts.

In passive networks the tone send mode of KE7100 (which can be used in combination with the optional search signal receiver Probe 310) is able to find the port.

The KE7107 and KE7108 sets are our complete solutions including both network tester and line finder.

Please accept YouTube cookies to play this video. By accepting you will be accessing content from YouTube, a service provided by an external third party.

YouTube privacy policy

If you accept this notice, your choice will be saved and the page will refresh.

KE7010 Remote Unit
Features ID programmable 01 - 32
LED indicates good / bad
Housing Solid and weather protected ABS
Dimensions 61 x 41 x 26 mm
Weight 30 g
Wire Test Copper Check of wires connected to PIN and Pair
Detects split pair from 6 ft (2 m) on
16 dedicated wiring schemes predefined, easy creation of own definitions from 2 wires incl. Profinet
16 cable types with predefined VP values, easy creation of own definitions
Graphical display shows wire map with clear indication good/bad
Measures all wires separately and shows length to fault short/open
Power over Ethernet Test Activation of PoE/PoE+/PoE++ port
Measuring of voltage and current. Shows available power in watts
Cable Trace Hub-Link Blink Function
Trace tones to be detected by capacitive Probe (optional)
4 tones selectable
Over voltage protection Up to 100 Volt
Housing Solid and weather protected ABS with drop protection
Battery 4 x 1.5 V Alkaline (AA) > 40 hrs operating time
Dimensions 195 x 100/78 x 45 mm
Weight 380 g without battery
Menu Language German, English
Environment Working temperature: 0 °C – +50 °C
Storage temperature: -25 °C – +75 °C
Humidity: 90% not-condensing
KE7100 Data Sheet 329.45 KB
KE7100 Short Operating Manual 271.88 KB
KE7100 Manual 1.96 MB

Product Catalogue

Kurth Electronic catalogue 13.63 MB