This item is no longer available.
Alternatively, you can use the following device:
0.49452-7 KE7207 Network and Cable Finder Kit
Sets for testing and troubleshooting in ICT networks!
The ideal sets for daily work in all types of networks – save time and money during installation and troubleshooting.
The KE7107 consists of the network tester KE7100 LANcheck and the cable finder kit KE701 Telco. It allows users to find additional cables and wire pairs contact-free in the shortest time. It also enables the use on telephone, network and voltage-free electrical installations.
Please accept YouTube cookies to play this video. By accepting you will be accessing content from YouTube, a service provided by an external third party.
If you accept this notice, your choice will be saved and the page will refresh.
| ET700 Telco Kit Tone Generator | |
|---|---|
| Durable wire lead length | 25 cm |
| Lead connectors | 2x banana with alligator clips 1x long RJ11 plug 1x RJ45 plug |
| Functions | Continuity test through LED + Tone Resistance test through frequency change Low Batt indication by flashing LED Auto shut off after 45 minutes Auto shut off override Unit ON indication by LED Indication of ALTernating freq. by flashing LED Indication of SOLID freq. by steady LED Data Port test with HUB-Blink |
| Search frequencies | 6 frequencies selectable SOLID: 1000, 2600, 577.5 Hz and ALT: 1000/800, 2600/1900, 577.5 intermittent Accuracy <±1% (quartz) |
| Reach | Trace cable length up to 15 km (no load) Tone over shorted pair up to 250 m |
| Transmitting Power | High power output with 9.2 V battery : 9.0 V PP no load 10 dBm into 600 Ohm 9 dBm into 100 Ohm 7,5 dBm into 50 Ohm |
| Overvoltage Protection | 500 Volt DC / 350 V AC |
| Dimensions / Weight | 68 x 96 x 25 mm / 150 g without battery |
| Additional features | Test leads protected by rubber-strain relief Gold plated contacts Separate battery compartment |
| KE7010 Remote Unit | |
|---|---|
| Features | ID programmable 01 - 32 LED indicates good / bad |
| Housing | Solid and weather protected ABS |
| Dimensions | 61 x 41 x 26 mm |
| Weight | 30 g |
| KE7100 | |
|---|---|
| Wire Test Copper | Check of wires connected to PIN and Pair Detects split pair from 6 ft (2 m) on 16 dedicated wiring schemes predefined, easy creation of own definitions from 2 wires incl. Profinet 16 cable types with predefined VP values, easy creation of own definitions Graphical display shows wire map with clear indication good/bad Measures all wires separately and shows length to fault short/open |
| Power over Ethernet Test | Activation of PoE/PoE+/PoE++ port Measuring of voltage and current. Shows available power in watts |
| Cable Trace | Hub-Link Blink Function Trace tones to be detected by capacitive Probe (optional) 4 tones selectable |
| Over voltage protection | Up to 100 Volt |
| Housing | Solid and weather protected ABS with drop protection |
| Battery | 4 x 1.5 V Alkaline (AA) > 40 hrs operating time |
| Dimensions | 195 x 100/78 x 45 mm |
| Weight | 380 g without battery |
| Menu Language | German, English |
| Environment | Working temperature: 0 °C – +50 °C Storage temperature: -25 °C – +75 °C Humidity: 90% not-condensing |
| P410 Probe | |
|---|---|
| Functions | 1 kHz filtered signal detection LED Torch light function ISDN signal detection LED |
| Reach | Trace distance to cable/wire up to 100 cm |
| Dimensions / Weight | 220 x 40/34 x 25 mm / 80 g without battery |
| Additional Features | Exchangeable non-conductive solid carbon fiber tip 3.5 mm earphone jack Gold plated contacts Separate battery compartment |
| KE701 Telco Kit Data Sheet (DE/EN) |
 1.05 MB
|
| KE301-KE801 Manual (DE/EN) |
1.32 MB
|
| KE7100 Data Sheet |
329.45 KB
|
| KE7100 Short Operating Manual |
271.88 KB
|
| KE7100 Manual |
1.96 MB
|
| KE7x0x Data Sheet |
2.28 MB
|
| Kurth Electronic catalogue |
13.63 MB
|
