KE7108 Network and Cable Finder Kit – Kurth Electronic

KE7108 Network and Cable Finder Kit

Please note: In this B2B shop we sell only to customers within Germany. If you want to order from another country, please send us an e-mail to sales@kurthelectronic.de.

This item is no longer available.

Alternatively, you can use the following device:
0.49452-8 KE7208 Network and Cable Finder Kit

Sets for testing and troubleshooting in ICT networks!

The ideal sets for daily work in all types of networks – save time and money during installation and troubleshooting.

SKU: 0.49451-8 Category:

KE7108 consists of the network tester KE7100 LANcheck and line finder kit KE801 Fibre & Copper. In addition to cable and wire pair identification, KE801 also enables customers to use the optical fibre continuity tester with laser for optical fibre connections.

ET800 Fibre & Copper Tone Generator
Durable wire lead length 25 cm
Lead connectors 2x banana with alligator clips
1x long RJ11 plug
1x RJ45 plug
Additional test interfaces 2,5 mm universal FO ferrule, adapter to 1.25 mm, SMA and POF available optionally
Coax F connector
Functions Continuity test through LED + Tone
Resistance test through frequency change
Low Batt indication by flashing LED
Auto shut off after 45 minutes
Auto shut off override
Unit ON indication by LED
Indication of ALTernating freq. by flashing LED
Indication of SOLID freq. by steady LED
Data Port test with HUB-Blink
Visual Fault Location (VFL)
Search frequencies 6 frequencies selectable
SOLID: 1000, 2600, 577.5 Hz and ALT: 1000/800, 2600/1900, 577.5 intermittent
Accuracy <±1% (quartz)
Reach Trace cable length up to 15 km (no load)
Tone over shorted pair up to 250 m
Transmitting Power High power output with 9.2 V battery :
9.0 V PP no load
10 dBm into 600 Ohm
9 dBm into 100 Ohm
7,5 dBm into 50 Ohm
Overvoltage Protection 500 Volt DC / 350 V AC
Dimensions / Weight 68 x 96 x 25 mm / 150 g without battery
Additional features Test leads protected by rubber-strain relief
Gold plated contacts
Separate battery compartment
KE301 – KE801 General Specifications
Power supply 9 V battery
>100 hrs operating time
Housing Heavy duty water resistant housing made from ABS, elastomeric silicon rubber push button switches
KE7010 Remote Unit
Features ID programmable 01 - 32
LED indicates good / bad
Housing Solid and weather protected ABS
Dimensions 61 x 41 x 26 mm
Weight 30 g
KE7100
Wire Test Copper Check of wires connected to PIN and Pair
Detects split pair from 6 ft (2 m) on
16 dedicated wiring schemes predefined, easy creation of own definitions from 2 wires incl. Profinet
16 cable types with predefined VP values, easy creation of own definitions
Graphical display shows wire map with clear indication good/bad
Measures all wires separately and shows length to fault short/open
Power over Ethernet Test Activation of PoE/PoE+/PoE++ port
Measuring of voltage and current. Shows available power in watts
Cable Trace Hub-Link Blink Function
Trace tones to be detected by capacitive Probe (optional)
4 tones selectable
Over voltage protection Up to 100 Volt
Housing Solid and weather protected ABS with drop protection
Battery 4 x 1.5 V Alkaline (AA) > 40 hrs operating time
Dimensions 195 x 100/78 x 45 mm
Weight 380 g without battery
Menu Language German, English
Environment Working temperature: 0 °C – +50 °C
Storage temperature: -25 °C – +75 °C
Humidity: 90% not-condensing
P410 Probe
Functions 1 kHz filtered signal detection LED
Torch light function
ISDN signal detection LED
Reach Trace distance to cable/wire up to 100 cm
Dimensions / Weight 220 x 40/34 x 25 mm / 80 g without battery
Additional Features Exchangeable non-conductive solid carbon fiber tip
3.5 mm earphone jack
Gold plated contacts
Separate battery compartment
KE7100
KE7100 Data Sheet 329.45 KB
KE7100 Short Operating Manual 271.88 KB
KE7100 Manual 1.96 MB

KE7x0x

KE7x0x Data Sheet 2.28 MB

KE801 Fibre & Copper

KE801 Fibre & Copper Data Sheet (DE/EN) 1.07 MB
KE301-KE801 Manual (DE/EN) 1.32 MB

Product Catalogue

Kurth Electronic catalogue 16.14 MB