This special set contains everything you need for testing Ethernet cabling and network.
The KE7200 Pro Kit combines our KE7200 Ethernet Performance Tester with our popular Probe310 to allow cable and port tracing connected to the KE7200.
With an universal test cable set, four KE7010 Remote units and a protective bag, you are perfectly equipped for testing any kind of Ethernet cabling.
KE7010 Remote Unit | |
---|---|
Features | ID programmable 01 - 32 LED indicates good / bad |
Housing | Solid and weather protected ABS |
Dimensions | 61 x 41 x 26 mm |
Weight | 30 g |
KE7200 | |
---|---|
Wire test copper | Check of wires connected to PIN and Pair Detects split pair from 6 ft (2 m) on 16 dedicated wiring schemes predefined, easy creation of own definitions from 2 wires incl. Profinet 16 cable types with predefined VP values, easy creation of own definitions Graphical display shows wire map with clear indication good/bad Measures all wires separately and shows length to fault short/open up to 200 m (TDR) |
Power over Ethernet Test | Activation of PoE/PoE+/PoE++/LTPoE port (IEEE 802.3af/at) Measuring of voltage and current. Shows available power in watts |
Cable Trace | Hub-Link Blink Function Trace tones to be detected by capacitive Probe (optional) 4 tones selectable |
IP Network Testing | Checks network with static IP or by DHCP Detect the network speed 10/100/1000 Mbit IP address and MAC address settable Listing of all working stations by name, IP and MAC address Ping of selected addresses - frame settable between 32 and 1024 Bit Shows result number of pings, lost pings, time min/max/average Constant ping mode to generate traffic |
Bridge Tap (optional) | Detects and locates Bridge Taps |
Overvoltage protection | Up to 100 Volt |
Housing | Solid and weather protected ABS with drop protection, IP52 |
Battery | 4 x 1.5 V Alkaline (AA) > 40 hrs operating time |
Dimensions | 195 x 100/78 x 45 mm |
Weight | 380 g without battery |
Menu language | German, English |
Environment | Working temperature 0° – +50°C Storage temperature -25° – +75°C Humidity 90%, non-condensing |
P310 & P510 Probe | |
---|---|
Functions | 1 kHz filtered signal detection LED Torch light function |
Reach | Trace distance to cable/wire up to 100 cm |
Dimensions / Weight | 220 x 40/34 x 25 mm / 80 g without battery |
Additional Features | Exchangeable non-conductive solid carbon fiber tip 3.5 mm earphone jack Gold plated contacts Separate battery compartment |