Professional sets for testing and troubleshooting ICT networks!
Professional sets for installation and troubleshooting, with the capability to create individual measurement protocols. The perfect solution for efficient work in active and passive ICT networks.
KE7207 consists of the active network tester KE7200 with memory function and the line finder kit KE701 Telco. It comes in a shockproof protective case including test cables, PC software and batteries. KE701 Telco also enables user to find cables and wire pairs in the shortest time possible without any touch and allows the use in telephony, network and voltage-free electrical installations.
Please accept YouTube cookies to play this video. By accepting you will be accessing content from YouTube, a service provided by an external third party.
If you accept this notice, your choice will be saved and the page will refresh.
| ET700 Telco Kit Tone Generator | |
|---|---|
| Durable wire lead length | 25 cm |
| Lead connectors | 2x banana with alligator clips 1x long RJ11 plug 1x RJ45 plug |
| Functions | Continuity test through LED + Tone Resistance test through frequency change Low Batt indication by flashing LED Auto shut off after 45 minutes Auto shut off override Unit ON indication by LED Indication of ALTernating freq. by flashing LED Indication of SOLID freq. by steady LED Data Port test with HUB-Blink |
| Search frequencies | 6 frequencies selectable SOLID: 1000, 2600, 577.5 Hz and ALT: 1000/800, 2600/1900, 577.5 intermittent Accuracy <±1% (quartz) |
| Reach | Trace cable length up to 15 km (no load) Tone over shorted pair up to 250 m |
| Transmitting Power | High power output with 9.2 V battery : 9.0 V PP no load 10 dBm into 600 Ohm 9 dBm into 100 Ohm 7,5 dBm into 50 Ohm |
| Overvoltage Protection | 500 Volt DC / 350 V AC |
| Dimensions / Weight | 68 x 96 x 25 mm / 150 g without battery |
| Additional features | Test leads protected by rubber-strain relief Gold plated contacts Separate battery compartment |
| KE7010 Remote Unit | |
|---|---|
| Features | ID programmable 01 - 32 LED indicates good / bad |
| Housing | Solid and weather protected ABS |
| Dimensions | 61 x 41 x 26 mm |
| Weight | 30 g |
| KE7200 | |
|---|---|
| Wire test copper | Check of wires connected to PIN and Pair Detects split pair from 6 ft (2 m) on 16 dedicated wiring schemes predefined, easy creation of own definitions from 2 wires incl. Profinet 16 cable types with predefined VP values, easy creation of own definitions Graphical display shows wire map with clear indication good/bad Measures all wires separately and shows length to fault short/open up to 200 m (TDR) |
| Power over Ethernet Test | Activation of PoE/PoE+/PoE++/LTPoE port (IEEE 802.3af/at) Measuring of voltage and current. Shows available power in watts |
| Cable Trace | Hub-Link Blink Function Trace tones to be detected by capacitive Probe (optional) 4 tones selectable |
| IP Network Testing | Checks network with static IP or by DHCP Detect the network speed 10/100/1000 Mbit IP address and MAC address settable Listing of all working stations by name, IP and MAC address Ping of selected addresses - frame settable between 32 and 1024 Bit Shows result number of pings, lost pings, time min/max/average Constant ping mode to generate traffic |
| Bridge Tap (optional) | Detects and locates Bridge Taps |
| Overvoltage protection | Up to 100 Volt |
| Housing | Solid and weather protected ABS with drop protection, IP52 |
| Battery | 4 x 1.5 V Alkaline (AA) > 40 hrs operating time |
| Dimensions | 195 x 100/78 x 45 mm |
| Weight | 380 g without battery |
| Menu language | German, English |
| Environment | Working temperature 0° – +50°C Storage temperature -25° – +75°C Humidity 90%, non-condensing |
| P410 Probe | |
|---|---|
| Functions | 1 kHz filtered signal detection LED Torch light function ISDN signal detection LED |
| Reach | Trace distance to cable/wire up to 100 cm |
| Dimensions / Weight | 220 x 40/34 x 25 mm / 80 g without battery |
| Additional Features | Exchangeable non-conductive solid carbon fiber tip 3.5 mm earphone jack Gold plated contacts Separate battery compartment |
| KE701 Telco Kit Data Sheet (DE/EN) |
 1.05 MB
|
| KE301-KE801 Manual (DE/EN) |
1.32 MB
|
| KE7200 PoE++ Data Sheet |
914.63 KB
|
| KE7200 short operating manual |
271.88 KB
|
| KE7200 PoE++ operating manual |
796.43 KB
|
| KE7x0x Data Sheet |
2.28 MB
|
| Kurth Electronic catalogue |
13.63 MB
|
