KE905 Remote Unit

Aufgrund der Integration von Kurth Electronic in die Gossen Metrawatt GmbH werden von uns vorerst keine Bestellungen mehr über die Webseite angenommen.
Bestellungen schicken Sie bitte per Email an
Due to the integration of Kurth Electronic into Gossen Metrawatt GmbH, we will no longer accept orders via the website for the time being.
Please send orders by email to

This item is no longer available.

Alternatively, you can use the following device:
0.49620 KE901 Line Test Assistant

Measurement helper to simplify cable fault measurement!

KE905 Remote is a remotely controllable line switch. Ideal in combination with KE‘s copper testing devices.

  • Compatible with KE3700 + KECT, KE3550 + KECT, KE3700 CT and KE2500, direct control commands to the KE905
  • Switching bridges and switching lines remotely
  • 4 pairs of cables or 3 measuring devices can be connected
  • Customer line remains in service until measurement starts
  • Remote switching up to 12 km possible
  • No influence on the lines up to 31 MHz
SKU: 0.49620-10 Category:

The KE905 enables mode selectable switching, insertion of bridges, turn an a measurement device on the far end of line, connect through another exchange, switching on a second acccess line. Developped for the actual Communication Services as ISDN, ADSL2+ and VDSL2 the device has small impact on measurements through 31 MHz on the far end. Remote-Controlled switching functions up to 20 km distance are possible without influence on other services in the loop.

After connecting the Remote Unit KE905 at the multiplier or intermediate distribution frame a tone can be send either to one or two access lines. For acces line 1 there are two different tones selectable. If no tone is necessary because the end of line is known, the service can be switched through to the customer. This enables him to use his service as long as possible.

The remote signals are modified DTMF-Signals to avoid static. Succeded the switching function the KECT shows a confirmation.

For active tests like crosstalk, balance, spectrum-analysise etc. the loop can be cleared or switched to another measurement device on the far end. In spite of the measurement device there can also b aenother Telephony / xDSL Port attached. This second local loop can be switched to one or another acces line so it is possible to measure the interference (NEXT).

With KE905 there is no assitance required and driving costs will be reduced.

Please accept YouTube cookies to play this video. By accepting you will be accessing content from YouTube, a service provided by an external third party.

YouTube privacy policy

If you accept this notice, your choice will be saved and the page will refresh.

KE905 Remote Unit
Housing Heavy duty ABS plastic weather-resistant design
Battery cover equipped with captive screws
4 test cord receptacles for alligator-to-TF cords
Resistant Mylar front foil with short operation instructions
Test cords 2 special test cords for testing up to 31 MHz
Insertion loss: 0 to 30 MHz < 0,5 dB
Crosstalk: -78 to -56 dB
Power source 9 V Alkaline battery, typical life 200 h
Overvoltage protection Up to 160 V AC/DC
Dimensions 160 x 95 x 35 mm
Weight 290 g with battery
KE905 Remote Unit
KE905 Remote Unit Data Sheet (DE/EN) 296.12 KB

Product Catalogue

Kurth Electronic catalogue 13.63 MB