KE7108 Network and Cable Finder Kit

The ideal set for the daily work in all types of networks without the need for documentation. Saves time and money during installation and maintenance.

Login to see prices
SKU: 0.49451-8 Categories: ,

Overview

KE7108 comes with the active Network Tester KE7100 LANcheck and the Cable Finder Kit KE801 Fiber & Copper in a durable case including test cables and batteries.
The KE801 allows the user to precisely locate wire pairs or cables inside walls or unmarked bundles. Additionally it can be used with fiber by the build-in fiber optic locator with modulatable laser source.

KE301 – KE801 General Specifications
Power supply 9 V battery
>100 hrs operating time
Housing Heavy duty water resistant housing made from ABS, elastomeric silicon rubber push button switches
KE401, KE701 & KE801 Probe
Functions 1 kHz filtered signal detection LED
Torch light function
ISDN signal detection LED
Reach Trace distance to cable/wire up to 60 cm
Dimensions / Weight 220 x 40/34 x 25 mm / 80 g without battery
Additional Features Exchangeable non-conductive solid carbon fiber tip
3.5 mm earphone jack
Gold plated contacts
Separate battery compartment
KE7010 Remote Unit
Features ID programmable 01 - 32
LED indicates good / bad
Housing Solid and weather protected ABS
Dimensions 61 x 41 x 26 mm
Weight 30 g
KE7100
Wire Test Copper Check of wires connected to PIN and Pair
Detects split pair from 6 ft (2 m) on
16 dedicated wiring schemes predefined, user settable via device
16 cable types with predefined VP values, user settable via device
Graphical display shows wire map with clear indication good/bad
Measures all wires separately and shows length to fault short/open
Power over Ethernet Test Activation of PoE/PoE+ port
Measuring of voltage and current. Shows available power in watts
Cable Trace Hub-Link Blink Function
Trace tones to be detected by capacitive Probe (optional)
4 tones selectable
Over voltage protection Up to 100 Volt
Housing Solid and weather protected ABS with drop protection
Battery 4 x 1.5 V Alkaline (AA) > 40 hrs operating time
Dimensions 195 x 100/78 x 45 mm
Weight 380 g without battery
Menu Language German, English
Environment Working temperature: 0 °C – +50 °C
Storage temperature: -25 °C – +75 °C
Humidity: 90% not-condensing
KE801 Fibre & Copper Tone Generator
Durable wire lead length 25 cm
Lead connectors 2x banana with alligator clips
1x long RJ11 plug
1x RJ45 plug
Additional test interfaces 2,5 mm universal FO ferrule
Coax F connector
Functions Continuity test through LED + Tone
Resistance test through frequency change
Low Batt indication by flashing LED
Auto shut off after 45 minutes
Auto shut off override
Unit ON indication by LED
Indication of ALTernating freq. by flashing LED
Indication of SOLID freq. by steady LED
Data Port test with HUB-Blink
Visual Fault Location (VFL)
Search frequencies 6 frequencies selectable
SOLID: 1000, 2600, 577.5 Hz and ALT: 1000/800, 2600/1900, 577.5 intermittent
Accuracy <±1% (quartz)
Reach Trace cable length up to 15 km (no load)
Tone over shorted pair up to 250 m
Transmitting Power High power output with 9.2 V battery :
9.0 V PP no load
10 dBm into 600 Ohm
9 dBm into 100 Ohm
7,5 dBm into 50 Ohm
Overvoltage Protection 500 V AC/DC
Dimensions / Weight 68 x 96 x 25 mm / 150 g without battery
Additional features Test leads protected by rubber-strain relief
Gold plated contacts
Separate battery compartment

KE7100

KE7100 Data Sheet 524.82 KB
KE7100 Short Operating Manual 271.88 KB
KE7100 Manual 1.96 MB

KE7x0x

KE7x0x Data Sheet 784.52 KB

KE801 Fibre & Copper

KE801 Fibre & Copper Data Sheet (DE/EN) 444.38 KB
KE301-KE801 Manual (DE/EN) 1.32 MB

Product Catalogue

Kurth Electronic Program 2019 16.67 MB