KE3550 xDSL Multitester

Ready for All-IP! The entrance for measurements in the broadband network.

The KE3550 xDSL MultiTest is the latest evolution in the KE-MultiTest series. In addition to all established features, it also has brand-new functions and functionalities like Wi-Fi testing, Bluetooth-supported data transfer as well as an optimized keyboard and shortcut keys.

  • New All-in-One handheld tester with modular system
  • ADSL-VDSL2, VDSL2-Vectoring, Vplus, and Bonding in one device
  • 1 Gb Ethernet ports
  • Triple Play tests (Data, VOIP, IPTV) with transfer rates up to 700 MBit/s
  • ISDN Uk0/S0, analogue and S2M test telephone functionality
  • Copper test functionality, fully integrated cable fault meter with remote
  • Bluetooth integrated
  • Wi-Fi integrated
  • Optional touchscreen
  • Intuitive operation
  • 3.5“ TFT display, sunlight readable
  • Display scratch resistant through tempered protection glass
  • Robust keypad
  • High performance LiPO battery for up to 5 h continuous xDSL measurement
  • Including software for managing and creating protocols and test sequences

We have bundled varying configurations on our KE5500 MultiTest packages page for a special price.

Login to see prices
SKU: 0.49815 Categories: ,

A versatile and revolutionary xDSL tester for DSL services in ADSL1/2/2+ / VDSL2, Vectoring, Super Vectoring (Vplus)
Bandplan 35b Annex Q and and bundled networks as well.
With a variety of interfaces the outstanding KE3700 xDSL Multitester supports many access network technologies. Accelerated fault diagnosis is made possible by its simple and fast operation. Interferences in the network, in outdoor and inhouse cabling as well as in CPE can be narrowed down quickly.
With the autodetect function of the DSL service, no choice between ADSL, VDSL or is necessary. Synchronization starts uncomplicated and all relevant measured values are clearly displayed on the large color display.
Automated and editable measurements on the copper pair allow fast and efficient work. Supporting this, control commands can also be sent directly from the tester to the KE905 Remote for the electronic remote switching of the measured cables.
The user-friendly entry level in the broadband measuring technology helps in the acquisition of the necessary measuring equipment!

KE3550 xDSL Multitester
Compliance ADSL1/2/2+ATIS/ANSI T1.413 Issue 2
ITU-T G.992.1 (ADSL incl. Annex A, B, J)
ITU-T G.992.3 (ADSL2 incl. Annex A, B, J, L)
ITU-T G.992.5 (ADSL2+ incl. Annex A, B, J, M)
IEEE 802.3ah (PTM)
ITU-T G.998.1/2/3 (Bonding)
Compliance VDSL2ITU-T G.993.2 / 993.5z VDSL2 (Vectoring)
ITU-T G.998.1/2/3 (Bonding with Profile 17a)
Profiles: 8a/b/c/d, 12a/b, 17a, 30a and 35b (Annex Q) optional
Bandplan: 997, 998, US0
IEEE 802.3ah (PTM)
Compliance G.fastITU-T G.9700 / 9701
DSL parametersMaximum attainable bit rates
Actual achieved bit rates
Actual bonded achieved rates
Latency modes: fast, interleaved
Data modes: ATM, PTM
Capacity (%)
Signal-to-noise ratio (SNR) margin
Output power
Attenuation/bin (Hlog/bin), QLN/bin, SNR/bin
Vendor code, revision
Interleave depth
Interleave delay
Bit Swapping
Modes: PTM, ATM
LATN per band, SATN per band
Test interfacesVDSL2, ADSL 1/2/2+ with auto detection
Ethernet 10/100/1000
Ethernet 10/100/1000 management
Web browser for service confirmation
EncapsulationRFC 2684 supporting bridged Ethernet (IPoE), IPoA (RFC 1577), PPPoE (RFC 2516), PPPoA/LLC and PPPoA/VC-MUX (RFC 2364)
Operating modesDSL Terminal, Router and Modem mode
Ethernet terminal mode
Login formatUsername and password using PAP / CHAP
Connectivity supportTR69 / BNG
LAN/WAN status
DNS, gateway
DHCP client / server, DHCP vendor class
VLAN ID, VLAN tagging
IPv4 and IPv6
Signal Strength
Ping testPing destination: Gateway, IP-Address or URL
Number of Pings: 1 to 9999
Packet size: 56 to 2048 Bytes (default is 56)
Timeout: 1 to 2000 seconds
Results: Packets sent/received, average round-trip delay (ms)
Traceroute testTraceroute destination: Gateway, IP-Address or URL
Timeout: in seconds, maximum is 120 s
Packetsize: 32 Bytes
Number of hops: 1 to 100 (default is 30)
Results: Indicates IP address of hop and round trip time in milliseconds (ms)
FTP / HTTP throughput test*Address: IP or URL
Direction: Upload and/or Download up to 700 MBit/s
Results: Time, kB transferred, speed in kBit/s
Bookmarks: User definable
(* Run up to 10 tests simultaneously)
Software optionsVoIP test: SIP protocol support, DSL and Ethernet; Codecs: G722, GSM, L16, A-Law, µ-Law, Speex; Results: MOS, R factor, Latency. Jitter, Packets (loss, sent)
IPTV test: Video standards: MPEG2, MPEG4 part 2 and 10, DSL and Ethernet; Programmable channel list, analyzes up to 10 streams simultaneously, Results: MOS, R factor, Latency. Jitter, Packets (loss, sent)
Interface optionsxDSL bonding module
KECT copper qualifying up to 31 MHz and Telco Multimeter
TDR fault detection / localization
ISDN BRI Uk0 / S0 / POTS interface (4B3T oder 2B1Q)
Wi-Fi interface
BluetoothBluetooth module for headset connection and data transfer, class 2
Display3,5“ TFT Display, RGB 240 x 320 sunlight readable
Power supplyHigh performance LiPo battery
Dimensions230 x 110/90 x 70 mm
Weight1300 g
HousingImpact-resistant ABS case with protective and high impact plexiglass as display cover
Menu languagesGerman, English, French, Italian, Dutch, Spanish

KE3550 xDSL Multitester

KE3550 Data Sheet 1.57 MB

Product Catalogue

Kurth Electronic Program 2018 11.70 MB